P 35 being parted out.

[Glen Miller]

#295 was destroyed in Hurricane Ike. I am in the process of taking off parts.
There are still a lot of items left that can be salvaged. Woodwork, cabin parts, hatches engine parts and such.
A lot of them just dissappeared off the boat in the past few of weeks.
The boat did not go underwater, but was beat to an almost unrecognizable conditon.
Some of the parts I will be putting on Ebay to help for the cost on a new boat.
If anybody needs anything email me and make an offer.

[e-mail]

Thanks
Glen

[Harris]

Hey Glen

Let me know if I can post some "parts" for you on the web site.

By the way....you have a hatch cover for the sliding main hatch?

Thanks Harris

[Glen Miller]

:The sliding hatch cover is still in good condition. I also have the alum. runners. It is oringinal gel coat.

Glen

[Ports]

What condition are your hatches in?? Assuming the later numbers still used the FRP hatches. What about the small portlights forward and main cabin port frames?? Did thye still use the horned mooring line chocks. Those are the ones that you have to turn the line almost 90 degrees to get the line out and will hold the line in in a vertical pull.

Aloha
Peter O.
#108

[Glen Miller]

Peter
The forward hatch is missing. The main hatch is fiberglass and is in good cond. It was just awlgripped with Cloud White. This is a reversable hinge system. One of the wire hinge pins is missing. The hatch hardware is in fair condition. Chrome finish is starting to give away.

I have all of the windows removed. The large window closest to the navstaion/icebox is missing.
These are in good condition structurely, I just got through reglazing them with a buytl rubber tape that we use on A/C ducts. It has a 20 year life. The finish on these are what you might expcet for a 30 plus year boat. There are a few small spots on the interior trim ring. The exterior still seem to have the anodizing still intacked.

I believe the bow chocks are the type you are talking about. They kind of do look like horns. They are made of some alumimun alloy. Very strong, and no sharp edges. I have these removed from the boat.

Glen

[spot476]

I am interested in a sea hood (cover over main sliding hatch). Could you e-mail me [e-mail]--an we'll talk.

[hirover]

Haven't checked back to this part of the P35 site for a while and didn't realize you'd responded to my post. Email me at roverhiatyahoodotcom with the pricing and digitals, if you have them.

Aloha
Peter O.
#108

[Glen Miller]

If anyone is interested.
I have a set of portlights in really good shape for sale on ebay. They have just recently been rebuilt and sealed.

Also a set of 17 gallon side mount tanks that fit nicely in the side lockers.

Type in "Pearson 35"

Glen

[Tom B]

Glen, just purchased a p35 and am in need of the ice box top, insulation modual on mine is gone. Also interested in opening ports.Thanks Tom

[tschriever]

Geln,
I am in need of a bow hatch do you still have part avaible?
Ted

[rayawl]

I am looking for a replacement alcohol bottle that fits in the compartment next to the center board winch.

[dcicirelli]

I have the bottle and the stove in my garage, if you want to see pictures send an email to [e-mail]

[Greg]

Do you still have the fixes port frames available?

[irishbasket]

i am looking for the rope to cable assembly for the centerboard next to the alcohol bottle locker do you have this item art

[irishbasket]

glen do you have the centerboard rope to cable assembly i an looking for 1