|
Post by msgulfcoastie on May 19, 2017 17:40:00 GMT -5
OK, so my m40 with a paragon tyranny is coming out soon and I have a fresh W40 with a Hurth 2:1 ready to drop in...here's begins my questions .. as the replacement setup appears to be 18-20" longer. - Has anyone ever done this swap and had clearance issues?
- If so, have you added a scab shaft or did you replace the entire propshaft if you kept the same mounting position.
Keep in mind I have not pulled the old setup yet and due to hernia surgery cannot get into the compartment to use a tape measure on the actual clearances. Thanks, Jim
|
|