|
|
Post by dcicirelli on Apr 1, 2011 21:44:35 GMT -5
I want to relocate my main sheet traveler but the PO bent the traveler so it fits on the curve behind the seats in the thingypit. I need a straight one. I would buy new if I knew what to get... any one know?
Thanks,
Dave
321-593-2254
dcicirelli@cfl.rr.com
|
|
|
|
Post by Jack Olsen on Apr 3, 2011 5:07:44 GMT -5
I used 1 1/4" Garhauer track. If you are putting it back in the original location (between the side seats and the aft locker), it is 56" in length. They included a self contained 4:1 traveler as well as the 4:1 mainsheet set up. I believe I used the "MT-1". You will find them to be very reasaonable in price and very helpful. I have had mine 7 or 8 years and it works just fine. I also used a piece of teak between the flat traveler and the deck which has a slight bend to it. garhauermarine.com/catalog_process.cfm?cid=34 |
|
|
|
Post by dcicirelli on Apr 5, 2011 11:04:47 GMT -5
I was thinking about moving it up on the coach and using the existing hardware then I would only need to buy the track and the stands... This site is great and I may change my mind...price is always an issue but these are some of the best I have seen for hardware...
Thanks,
Dave
|
|
|
|
Post by Peter O on Sept 4, 2011 13:05:35 GMT -5
I've got a new Harken tall travellor track approximately 4' long. You will need this type of track if you are going to place the travellor on the coach roof. Bought if for the standard aft sheeting but it wouldn't bend to the curve of the deck. Would need a press to bend it to a curved deck. Will make you a deal you can't refuse.
|
|
