Post by roverhi on Jun 4, 2012 10:22:21 GMT -5
Need a new set of controls for my Yanmar 3GM30F engine in my tiller steered sailboat. Anyone using the Morse CH2100p single handle control??
www.go2marine.com/item/86333/single-lever-side-mount-sail-boat-engine-control-ch2100-ch2100p.html?WT.mc_id=gb1&utm_source=googlebase&utm_medium=productfeed&utm_campaign=googleshopping&gclid=CMKA6u3ttLACFcoHRQodSWIoag
Any other controls that would work with this engine?? Ideally, would like to find an old Morse sailboat removable dual handle set up but have been looking for a set for two years without success.
My '69 Pearson 35 with a Yanmar3GM30f engine had separate throttle and shift controls that probably were original to the A4. The shift control was at the forward end of the thingypit and throttle about midway back, both on the side of the thingypit. I've removed these controls and bought a used Morse Engine Control.
www.discountmarinesupplies.com/Teleflex_Morse_MJB_Control_CH2500P.html
There apparently is a bushing missing on this unit and the throttle is sloppy, not loose but downright sloppy. The engine immediately returns to idle as soon as you take your hand off the throttle.
Didn't pay much for the used control and doubt that it's worth finding or making the bushing that appears to be missing. Unfortunately got sticker shock when I priced a new one of these controls.
www.go2marine.com/item/86333/single-lever-side-mount-sail-boat-engine-control-ch2100-ch2100p.html?WT.mc_id=gb1&utm_source=googlebase&utm_medium=productfeed&utm_campaign=googleshopping&gclid=CMKA6u3ttLACFcoHRQodSWIoag
Any other controls that would work with this engine?? Ideally, would like to find an old Morse sailboat removable dual handle set up but have been looking for a set for two years without success.
My '69 Pearson 35 with a Yanmar3GM30f engine had separate throttle and shift controls that probably were original to the A4. The shift control was at the forward end of the thingypit and throttle about midway back, both on the side of the thingypit. I've removed these controls and bought a used Morse Engine Control.
www.discountmarinesupplies.com/Teleflex_Morse_MJB_Control_CH2500P.html
There apparently is a bushing missing on this unit and the throttle is sloppy, not loose but downright sloppy. The engine immediately returns to idle as soon as you take your hand off the throttle.
Didn't pay much for the used control and doubt that it's worth finding or making the bushing that appears to be missing. Unfortunately got sticker shock when I priced a new one of these controls.