|
Post by mayhemdog on Aug 26, 2015 10:43:21 GMT -5
Does anyone know the specs for a 1968 Pearson p35 needed for over the road transportation ? Height, length ,beam and weight? I just bought the vessel and need to get it moved from Union Hall Va to Norfolk,Va. Any info and advice will be greatly appreciated.
|
|
|
Post by roverhi on Aug 26, 2015 16:09:57 GMT -5
Beam is 10', length on deck 35', height from keel to cabin top less than 9'. Don't have an exact figure on the height but could give you a pretty close measurement the next time I'm down at the boat. Boat is in the water so wouldn't be exact, however. Height shouldn't be a big issue with the boat as its shallow draft added to the topsides and cabin isn't so high as to be an issue for most all bridges. The bow pulpit sticks out a bit beyond the bow so would add to the length if you didn't remove it for transport.
|
|
|
Post by mayhemdog on Aug 27, 2015 6:45:27 GMT -5
Thanks a lot. Looking forward to getting out to our new boat. Still a couple weeks away though. Proud to be a P35 owner!!!
|
|
|
Post by seaner97 on Aug 28, 2015 14:51:05 GMT -5
Welcome aboard! I think it was 8' 9.75" when we measured ours. Way shorter than most smaller fin keels out there due to the CB.
|
|
|
Post by gregstokes on Aug 20, 2016 10:42:40 GMT -5
We enjoy our 1968 model that we sail on the York.
|
|